Optical microscope adapter

Introduction:

FR-uProbe-LC, Simply connect to the C-Mount adapter for most commercially available optical microscopes (reflectivity and/or transmittance) to provide:

Real time spectral measurement within the wavelength range supported by the microscope

Measurement of film thickness, optical properties, and non-uniformity

O Use integrated, USB connected high-resolution and high-quality color cameras for imaging

O Not affected by the performance of the microscope itself

The spot size (the area where reflectance or transmittance signals are collected) is defined by the aperture size and objective magnification, and can be as small as 2 μ m

Application:

o University&Research Laboratory

Semiconductor (oxide, nitride, Si, resist, etc.)

MEMS devices (photoresist, silicon film, etc.)

LCD display LED

Data storage

Anodizing

Hard/soft coating on curved substrate

Polymer coatings, adhesives, etc

Biomedical (poly (p-xylene), catheter wall thickness, etc.)

Contact us for your application requirements

Feature:

oclickAnalysis (without initial requirement)value）

oCan dynamically measure continuously

Measure n&k, color coordinates

Built in database with over 700 types of materials

Multiple installations for offline analysis

Free software updates

Specifications:

The measurement area spot (the area where the reflected signal is collected) is related to the objective lens and aperture size. The standard aperture sizes are: 500 μ m (square), 250 μ m (square), 100 μ m (square). 250 μ m is the default aperture value Other aperture sizes available upon request: 150 μ m (square) and 50 μ m (square)

Measurement principle: